molding & casting – Makesly Store

Smooth-Cast Semi – Rigid Line 66D Series, Trial Size Unit

admin — Thu, 25 Apr 2024 14:45:33 +0000

Smooth-Cast 66D is a grey resin with a 7 minute pot life and 60 minute demold time. The Smooth-Cast Semi-Rigid line of low-cost semi-rigid urethane casting resins cure quickly to semi-rigid plastics that offer excellent impact resistance. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments. Materials should be stored and used in a warm environment (73° F/23° C). These products have a limited shelf life and should be used as soon as possible. All liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Material	plastic
Brand	Smooth-On
Line Weight	1.9 Pounds

About this item

Smooth-Cast 66D is a grey resin with a 7 minute pot life and 60 minute demold time;
The Smooth-Cast Semi-Rigid line of low-cost semi-rigid urethane casting resins cure quickly to semi-rigid plastics that offer excellent impact resistance;
These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment;
Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments;
Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Smooth-On VytaFlex 30 – Liquid Urethane Rubber – Pint Unit

admin — Wed, 24 Apr 2024 18:39:22 +0000

Using Smooth-On's exclusive "V-Polymer" technology, VytaFlex urethane rubbers offer superior physical and performance properties designed for casting concrete. VytaFlex urethanes feature convenient 1:1 (by volume) mix ratios. Vacuum degassing is not necessary and VytaFlex rubbers cure with negligible shrinkage to a durable rubber that will last in production.Vibrant colors can be achieved by adding So-Strong Color Tints, available from Smooth-On. VytaFlex 20- MIX RATIO 1:1 by volume, Pot Life: 30 min., Demold Time: 16 hours, Cure Time: 24HRS, Shore A Hardness: 20, Color: Clear Amber

Using Smooth-On's exclusive "V-Polymer" technology, VytaFlex urethane rubbers offer superior physical and performance properties
Perfect for Concrete Castings
Easy 1-to-1 by volume mix ratio
Lower viscosity means vacuum degassing is not required
Shore 30A Hardness

Life Casting Starter Kit With Alja-Safe Alginate

admin — Wed, 17 Apr 2024 15:34:51 +0000

Smooth-On Alja-Safe molding gel lets you make a mold of a hand or other body part for a one-time casting project. Captures perfect skin detail. Quick Start Guide will get you started. Great for keepsakes and presents. Adult Supervision Required. Keep Out of the Reach of Children.

Color	White
Brand	Smooth-On, Inc.
Item Dimensions LxWxH	7.8 x 5 x 4.9 inches
Shape	Hand

About this item

Comes with: 0.85 lb. Alja-Safe Molding Gel – the world’s first and only crystalline silica free alginate (a known carcinogen), 2 lb. casting plaster, Quick Start Guide

Smooth-Cast Semi – Rigid Line 60D Series, Trial Size Unit

admin — Wed, 17 Apr 2024 15:25:03 +0000

Smooth-Cast 60D is newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments. Suitable for making impact resistance prototypes, abrasion resistant parts, climbing holds, foundry patterns, roller facings, vibration pads, etc. Materials should be stored and used in a warm environment (73°F / 23°C). These products have a limited shelf life and should be used as soon as possible. All liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Smooth-Cast Semi – Rigid Series Line 61D Series, Trial Size Unit

admin — Wed, 17 Apr 2024 15:22:21 +0000

Smooth-Cast 61D is newly reformulated with a translucent white appearance and improved physical properties;
All Smooth-Cast semi rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments;
Suitable for making impact resistance prototypes, abrasion resistant parts, climbing holds, foundry patterns, roller facings, vibration pads, etc;
Materials should be stored and used in a warm environment (73°F / 23°C). These products have a limited shelf life and should be used as soon as possible. All liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic;
Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Alja- Safe Breeze Crystalline Silica Free Liquid Alginate 1.10 lbs

admin — Wed, 17 Apr 2024 14:42:49 +0000

Alja-Safe Breeze is easy to use and cures quickly. It reproduces fine detail and makes an excellent temporary mold good for one or two reproductions of any body part. Store and use Alja-Safe Breeze at room temperature. Alja-Safe Breeze may get warm in storage/shipping during the summer months which will cause the material to set too fast. To remedy, store Alja-Safe Breeze in a cool area (60°F – 70°F or 15°C – 21°C) for 24 hours before using. Alja-Safe Breeze has a limited shelf life and should be used as soon as possible. Do not allow moisture to come into contact with unused Alja-Safe Breeze.

Alja- Safe Breeze is a new liquid alginate which blends easily with water, creating a unique, skin safe moldmaking material;
Perfect for making single-use pourable molds of hands, feet and other body parts;
Mix ratio is 5 part warm water (80°F / 27°C) to 1 Part Alja- Safe Breeze liquid by volume;
Pot life: 3 minutes. Cure time: 8 minutes;
Store and use at (73°F/23°C)

Smooth-On Mold Star 31T Silicone Mold Making Rubber – Trial Unit

admin — Wed, 17 Apr 2024 14:25:19 +0000

Mold Star 31T cures into a soft, strong rubber that is tear-resistant and exhibits very low long-term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials. Cured Mold Star silicones have been tested and certified skin safe by an independent laboratory.

Material	Silicone, Rubber
Brand	Smooth-On
Shape	Star

Smooth-Cast 326 – Urethane Medium-Set Resin – Trial Size Unit

admin — Wed, 17 Apr 2024 14:23:33 +0000

Smooth-Cast 326 is newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Suitable for making impact resistance prototypes, abrasion resistant parts, climbing holds, foundry patterns, roller facings, vibration pads, etc. Liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Materials should be stored and used in a warm environment (73°F / 23°C). Mixing tools and containers should be clean and made of metal, glass or plastic. Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves.

Smooth-Cast 326 Color Match Series is newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi rigids are now mercury free and phthalate free.
These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments.
Suitable for making impact resistance prototypes, abrasion resistant parts, climbing holds, foundry patterns, roller facings, vibration pads, etc.
Liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Materials should be stored and used in a warm environment (73°F / 23°C). Mixing tools and containers should be clean and made of metal, glass or plastic.
Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves.

Smooth-On VytaFlex 60 – Liquid Urethane Rubber

admin — Wed, 17 Apr 2024 12:19:14 +0000

Using Smooth-On’s exclusive “V-Polymer” technology, VytaFlex urethane rubbers offer superior physical and performance properties designed for casting concrete. VytaFlex urethanes feature convenient 1:1 (by volume) mix ratios. Vacuum degassing is not necessary and VytaFlex rubbers cure with negligible shrinkage to a durable rubber that will last in production.Vibrant colors can be achieved by adding So-Strong Color Tints, available from Smooth-On. VytaFlex 20- MIX RATIO 1:1 by volume, Pot Life: 30 min., Demold Time: 16 hours, Cure Time: 24HRS, Shore A Hardness: 20, Color: Clear Amber

Using Smooth-On’s exclusive “V-Polymer” technology, VytaFlex urethane rubbers offer superior physical and performance properties
Perfect for Concrete Castings
Easy 1-to-1 by volume mix ratio
Lower viscosity means vacuum degassing is not required
Shore 60A Hardness

Smooth-On SIL-poxy Rubber Silicone Adhesive – 0.5 oz tube

admin — Fri, 09 Jun 2023 08:19:12 +0000

A little goes a long way. Sil-Poxy Silicone Adhesive Sil-Poxy is a one component adhesive made specifically for bonding RTV silicone rubber to silicone rubber and other substrates including some plastics (urethane), plasters/ceramics, fabrics, etc. Sil-Poxy will work with tin or platinum-cure silicones and provides a strong, flexible bond between silicone parts with high elongation. Sil-Poxy can be used repairing torn silicone rubber molds. Other applications include bonding silicone for prosthetics and animatronics. Sil-Poxy foil pouch 0.5 oz tube – 12 minute cure time.